Read all instructions before use. Retain for furniture reference.

Failure to follow these instructions could result in a fire hazard. Use only with good quality wax melts. Not intended for use with fragranced warming oil or potpourri refresher oil.

When using electrical products, basic precautions should always be followed including the following

• Remove all packaging
• Read all instructions before using this product
• Do not put fingers or hands into the unit
• Do not immerse in water
• To reduce the risk of injury, close supervision is necessary when used near children
• Keep foreign out of the wax pool
• The electric wax burner becomes very hot during use, do not touch or move whilst alight or whilst wax remains molten

This electric wax melt burner uses electricity. Risk of electrical shock exists if metal or any other foreign object us inserted into any part of this burner or it is improperly used. Use only appropriate, properly functioning 230-volt electrical outlet. Do not add water to the wax melts. Do not leave unattended. Keep out of reach of children and pets.

Direction for use

• Place unit on a level, flat, cool, heat resistant surface away from draughts, other heat sources and flammable objects. If used on a non-heat resistant surface damage may occur if the unit is used without a protective place, tray or similar products.
• Position the wax melt segment on the top bowl of the wax melt burner.
• Plug in the electric wax melt burner into the appropriate, properly functioning 230-volt electrical outlet and turn on the switch.
• Allow the heat to melt the wax and fragrance will release into the room. The electric burner will become hot while in use, do not touch while in use, heated wax can cause burns. Allow the electric to cool completely before touching or moving.
• If no wax remains in the bowl unplug the the electric burner and allow to cool before refilling the bowl.
• If wax remains in the bowl after use and you wish to remove the wax, wait until the wax cools and hardens, and then gently place pressure on one end of the wax and pop the wax out.
• Let the electric wax melt burner completely cool before re-use

DO NOT USE METAL OBJECTS TO CLEAN OUT THE WAX. DO NOT APPLY EXCESSIVE PRESSURE WHEN CLEANING OR REMOVING THE WAX. THIS MAY CRACK AND DAMAGE THE BURNER. DO NOT PLACE THE BURNER IN THE FREEZER.

CAUTION: WAX MELT BURNERS BECOME HOT DURING USE. ONLY USE ON A HEAT RESISTANT SURFACE. IF UNSURE USE A PROTECTIVE PLATE, TRAY OR SIMILAR PRODUCT.

THE BULB USED IN THIS APPLIANCE IS A 40 WATT HALOGEN GU9 CAPSULE BULB.